bsp

Morning. I have this connection to make, between 35mm copper pipe and a big Grundfos pump. The official Grundfos connector is this iron 1/14 bsp female. The brass adapter I've got screws in, too tight to do by hand but smoothly with a spanner. There's no mating face though, and it's a...

Hi folks, I’m trying to understand why 2 items advertised as 5/8 bsp are not the same size? So I have a draft beer system at home and bought a beer keg coupler with threads advertised as male 5/8 bsp(p). In order to attach the beer line to the coupler, I bought an adapter which was advertised...

Hi I just purchased a 3 way tap that came with 1/2" flexi hoses for each of the 3 holes. 1 hose is for the hot water and 1 is for the cold water. The 3rd one is for the filtered water. I am using an undersink water filter system that connects to a tap via a 1/4" plastic tubing. How on earth do...

Hi - looking to replace a wall-fixed shower head. Immediately running into some issues: It is +10yrs old and is likely discontinued, although someone has mentioned it may be a Grohe. I have approached Grohe my contact says he has never seen it before. - any ideas of the brand will help...

I apologise if these sound silly questions, but I would love some advice on making threaded fittings weep-proof. I have 1/2" Danfoss Randall RA-G Single Pipe TRV Body which comes with a fitting which screws onto the 1" OD outlet of the TRV and screws into the radiator. (see...