en-suite

I'm hoping someone can offer some advice on an issue we have, this is my first post on DIYnot and I've tried to be as brief as possible. We live in a townhouse built in 2013/14; we've been living in it ever since so roughly 12.5 years. Over the last 4 months or so, we've been experiencing a...

Hi, Having some dilemma where to place an extraction fan in my ensuite as looks like "static" vent (old hole above the window) and opening a window is not enough to take a moisture out, especially during a winter. Attached a sketch of bathroom and noted where the black dots starting coming out...

I had to remove the original moisture board in my ensuite, and I’m about to replace it with good quality plywood. My question relates to whether it is necessary to leave a 10 mm gap around the small room (< 3m²)? If not, what gap is appropriate? TIA

I will soon be skimming the ceiling of my en-suite and spotted a few comments about using SBR instead of PVA prior to the skim. Previously i've only ever used PVA, but then again i've never skimmed an area that is affected by humidity. I have both products in the garage and so is SBR the better...

I am refurbishing my en-suite and one job is to get the sparky in to move the ceiling lights to better positions. Generally speaking the ceiling is not in great condition and so I am looking at re-skimming it to tidy it all up I used a straight edge to check how flat the ceiling is and there is...