eol

So I've just installed a Pyronix Euro 76 alarm panel (Confiqured and running the system in the DEOL mode with 4.7KΩ for alarm and 2.2KΩ for tamper) in my new house and zone 4 which has two detectors wired in series according to the below (other than the tamper jumper on the second PIR is set to...

Good morning, I've got a Texecom Premier Elite 88 with 4 Capture D20 PIRs, each wired as EOL on their own zone. They all have selectable resistors and are set to the Texecom setting (2k2/4k7). 3 of them work fine, but one of them goes to Tamper (>100K) when triggered (by both PIR and Microwave)...

Hello all, as you may be aware from my other posts, I've been upgrading an old G3 alarm system using the installed wiring but all new components and have installing a Texecom Premier Elite 24 using Texecom Premier Elite Compact PIRs (and some other stuff). This post is specific to the PIRs...