• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

sizing

  1. L

    Pergola Beam/Header sizing

    I'm building a corner pergola. The span across the front will be up to 4.5m. Will likely go for 6x6 posts as prefer the chunkier look. This is the sort of design I'm aiming for (mine will also be integrated into a deck): Thanks
  2. JD2012

    Bolt Type Query to bolt down Vice.

    I am looking for bolts to attach a Vice to a worktop in my shed. I found one that fits but I need it a bit shorter about 6mm in length and I don't have nuts. It says on the head M BUFO 88. Does anyone know if B&Q stock these or something that will do? Thanks
    • JD2012
    • Thread
    • bolt bolts question size sizing stock
    • Replies: 65
    • Forum: General DIY
  3. rbranco

    ECOTEC 418 HW causing S53/S07/S08, sizing, VR66

    Ecotec 418 open vented S-Plan 2 Port HW & CH Valves Standard HW/CH timer and roomsat/cylstat Pump 15/50 - Speed 3 ABV installed (setting 2) between pump/valves and return back before the Magnaclean but its on a 15mm not 22mm pipe 10 Radiators (6xType10,2xType20,1xVertical double column, 1xType11...
  4. M

    Extractor fan selection

    Hi - I'm installing the ducting for a holiday let with extractors in the two en-suite shower/wet rooms, a kitchen and a shower attached to a sauna. I've sized them all and am looking at in line duct fans for the two shower/wet rooms of about 240m3/hr and about 25dBa at 3m. This is over spec...
  5. CrazeUK

    Higher rate boiler?

    Hi Guys. My parents house is a 6 Bed, 2 lounge, Large kitchen and 3 basement room house. There are 10 radiators in total, with a potential of 3 basement ones to be added at a later date. Currently they have 2 Worcester boilers. One does the ground and first floors, other does basement and top...
Back
Top