soil pipe toilet

  1. R

    Broken clay soil pipe collar?

    Hello, we are having some groundworks done and have noticed that where the concrete has been partially removed around the bottom of the soil pipe (from toilet etc), it has exposed a gap at the end of the plastic pipe which is leaking - it looks maybe like the collar on the lower clay pipe has...
  2. F

    Moving downstairs toilet - currently not in the centre.

    Hi All, I'm re-doing the downstairs toilet. So far I've: Ripped out the old toilet suite and sink. Re-routed the CH feed and return from upstairs to come through the garage and through the back wall of the toilet - and I'm going to bury them in the screed (boxed in access for the joints -...
  3. R

    Toilet Keeps Blocking

    Hi, Our toilet started leaking at the pan connector a few weeks ago so I replaced this part myself thinking it was a simple enough job... When dismantling the toilet & old connector I discovered that an extender was pushed inside the soil pipe which I thought was odd as the standard pan...
  4. H

    Does a flexible WC pan connector fit directly inside a ring seal and/or solvent weld fitting?

    Hi, please forgive the newbie question: Will a standard McAlpine Flexible WC Pan connector like this... ... fit directly into a ring seal connector.... and/or a solvent weld connector.... ...on a standard 110mm soil pipe? Or would I need to insert a cut piece of pipe inside each...
  5. M

    Two en-suites, one stack...

    Hi all, It feels like I’m asking questions daily at the moment! I’ve got two new en-suites going in next to each other either side of a brick wall. I have access to one internal stack running up the dividing wall. Hopefully this sketch makes sense: My idea is to fit a triple branch (see...
  6. M

    Can I add toilet to the same soil pipe plus reposition

    Hello, I am looking at splitting my bathroom into 2 (2nd floor flat) In order to do that I would: 1) Need to add a second toilet 2) Need to reposition toilet and soil pipe. I am getting a plumber out - but I wonder if it is principle possible to do the configuration as per drawing. Thanks...
Back
Top