32mm mdpe to 15mm copper

[thomp1983]

Hi all,

My new water main into my extension is in 32mm mdpe via an insuduct.

I now need to get it from 32mm mdpe down to the 15mm copper pipe that currently exits the stopcock.

I can't find a 32mm to 15mm stopcock, I also can't find a 32mm to 22mm stopcock but would I be better fitting 22mm pipe for the cold water feed around the house as the 15mm will be getting moved/extended as part of the extension works anyway

Thanks
Chris

 

[Exedon]

I've turned 32mm in insuduct through wall with a 32 mm elbow with a 22mm reducing set in it .
After that easy!

 

[thomp1983]

I've turned 32mm in insuduct through wall with a 32 mm elbow with a 22mm reducing set in it .
After that easy!

Do you have a link to the reducing set you've used before?

 

[Exedon]

Fairly certain it would have been a philmac elbow and reducing set.

 

[Madrab]

https://www.mrcentralheating.co.uk/mdpe-coupling-32mm-x-22mm-conversion-reducer

Certainly change your distribution pipework to 22mm if possible, it would be a bit of waste to lose all that nice quiet flow if reduced to 15mm.