Convert 32mm MDPE to 15mm copper + STOP COCK

[boolie]

Hi I have new 32mm MDPE coming into the house

about 1-2 metres away from the MDPE is the existing 15mm copper (currently supplied by lead)

I want to join the 32mm MDPE to the 15mm copper and have a stop cock but not sure what parts to use. Can you advise?

I was hoping that something like this would be easily available for 32mm but it isn't 25mm-MDPE-to-15mm-copper

 

[muggles]

Bit of a shame to go to the trouble of bringing 32mm in only to reduce it all the way down to 15mm internally, but I'd do it by using a Philmac 2842 with a 15×¾MI in it. Don't forget your 32mm liner

 

[bluebaron]

Bit of a shame to go to the trouble of bringing 32mm in only to reduce it all the way down to 15mm internally, but I'd do it by using a Philmac 2842 with a 15×¾MI in it. Don't forget your 32mm liner

what would you run internally then? 32mm? Seems a bit big to me?

 

[Madrab]

22mm to each outlet branch, then 15mm, that will maximise flow and minimise noise.