Alarm Panel

[sh]

Hi
I fitted an alrm system into my bungalow some 15 years ago.Different zones,exit circuit etc.
The panel has now died on me ,can somebody tell me if it is just a case of replacing with a new panel (are they roughly all wired the same) as I dont really want to start replacing wiring to pir's etc
Thanks

 

[andy]

Hi
I fitted an alrm system into my bungalow some 15 years ago.Different zones,exit circuit etc.
The panel has now died on me ,can somebody tell me if it is just a case of replacing with a new panel (are they roughly all wired the same) as I dont really want to start replacing wiring to pir's etc
Thanks

alarms work in the same way. so you should be able to just change the panel (well, some of the newer panels use EOL etc, but they will support the normally closed wiring)

 

[sh]

Please excuse my ignorance but what is EOL ?
Can you recommend a panel that would be ok ?
Is this one from TLC ok
www.tlc-direct.co.uk/Products/TSOPTG3.html

 

[andy]

Please excuse my ignorance but what is EOL ?
Can you recommend a panel that would be ok ?
Is this one from TLC ok
www.tlc-direct.co.uk/Products/TSOPTG3.html[/QUOTE]

End Of Line. uses resistors at both ends to use less cores for the alarm and also is harder to tamper with

the panel you have looks OK

 

[offroader]

Please excuse my ignorance but what is EOL ?
Can you recommend a panel that would be ok ?
Is this one from TLC ok
www.tlc-direct.co.uk/Products/TSOPTG3.html[/QUOTE]

ADE systems are ok, what system are you replacing?

Scany panels are far better though...... http://www.scantronic.co.uk/