Got an old technics amp - the same one as here
It's developed a new problem as regards the speaker connections.
I lost the left channel so did the usual of changing speakers around and swapping cables etc.
The sound comes back on if I don't clamp the wires, but drops out after a while so I have to wiggle the cables again.
The strange thing is it does the same thing irrespective of whether I use Speaker A or Speaker B connections.
I know some may say bin it, but having adjusted the tone controls it still sounds (to me) really good with my setup.
So any suggestions as to where I start with trying to solve the speaker connection problem?
It's developed a new problem as regards the speaker connections.
I lost the left channel so did the usual of changing speakers around and swapping cables etc.
The sound comes back on if I don't clamp the wires, but drops out after a while so I have to wiggle the cables again.
The strange thing is it does the same thing irrespective of whether I use Speaker A or Speaker B connections.
I know some may say bin it, but having adjusted the tone controls it still sounds (to me) really good with my setup.
So any suggestions as to where I start with trying to solve the speaker connection problem?
