Machine cutting out when switch it on...sounds like shorting out and led's flicker randomly then eventually go off. When try to power back on, led's flicker briefly, sounds like shorting out again then off.
Read an older post on here suggesting disconnect the heating element (taped up ends) and switching back on. So did this, switched the power back on and was able to start the machine...it went for a second or two then same problem but sparking coming from the little black unit where the main power supply comes in.
Apart from being thick and DIY'ily challenged....what's my problem please?

Read an older post on here suggesting disconnect the heating element (taped up ends) and switching back on. So did this, switched the power back on and was able to start the machine...it went for a second or two then same problem but sparking coming from the little black unit where the main power supply comes in.
Apart from being thick and DIY'ily challenged....what's my problem please?
