Hi Folks
I have a baxi 105e. The downstairs raidiators don't get very hot compared to the upstairs. The Boiler seems to cut out before they get chance to feel hot.
I have changed the PCB. Fitted a new thermostat and changed the sensor on the CH feed.
I have turned the upstairs rads off but it still makes no difference. Before i changed the board, the old made kept cutting out completely- but it must have done something as for a few days before i changed it the downstairs radiators were piping! Then when i change the board, it went back to how it was before.
Any ideas? The plumber added 2 new radiators when he fitted it. the old system was red hot.
Your advice would be gratefully recieved.
Many thanks
Jed[/b]
I have a baxi 105e. The downstairs raidiators don't get very hot compared to the upstairs. The Boiler seems to cut out before they get chance to feel hot.
I have changed the PCB. Fitted a new thermostat and changed the sensor on the CH feed.
I have turned the upstairs rads off but it still makes no difference. Before i changed the board, the old made kept cutting out completely- but it must have done something as for a few days before i changed it the downstairs radiators were piping! Then when i change the board, it went back to how it was before.
Any ideas? The plumber added 2 new radiators when he fitted it. the old system was red hot.
Your advice would be gratefully recieved.
Many thanks
Jed[/b]
.Know a bit about piping up a system( old ones anyway)
