baxi barcelona

[horlicks]

hello got problems with baxi barcelona , i ve change gas valve and ignition board after no lighting, after changin gas valve, the ignition board kept sparkin , so changed that .

its lights up now for a few seconds then repeats itself for about 30 secs , then lockout light comes on . also cleared condesin

any ides people

 

[Kristoflampie]

Check the seals round combustion door for heat damage, they often fail and trip the chamber thermostat with the escaping gases , also try disconnecting and taping the condensate trap sensor ( white wire) which will lockout the burner at the slightest hint of damp or route to earth. Both common faults, good luck

 

[Baxmax]

Electrodes,non rectification,
what is the working pressure when it does fire up ?

 

[DP]

Would have been cheaper getting an engineer out to attend the defect. Have you checked gas pressures on the gas valve?

 

[powell30]

Are you registered to work on gas appliances?

 

[Baxmax]

Yeah show us yer badge

 

[horlicks]

yes iam registered , have been for 10 years , so there

 

[powell30]

No offence intended....i just asked the question. I suggest you raise this in the combustion chamber.....it's gas specific and should be discussed in the appropriate forum

 

[horlicks]

ok cheers