These past few weeks it has stopped working with the warning light for flame failure lit, but a reset has got it working again.
However today it is not firing up at all and no warning lights are coming on either; the two green lights come on as normal (power and rads) and it makes the noise as normal (like gas running) but there is no fire.
I cleaned it all as per the servicing instructions, but it's still the same.
Any ideas what it could be? Should I replace the Spark Electrode and Flame Sensing Electrode?
I'm sorry we don't allow diy gas information on this forum therefore I will be closing this thread and have to advise you to engage a recommended gas safe engineer.
Mod
However today it is not firing up at all and no warning lights are coming on either; the two green lights come on as normal (power and rads) and it makes the noise as normal (like gas running) but there is no fire.
I cleaned it all as per the servicing instructions, but it's still the same.
Any ideas what it could be? Should I replace the Spark Electrode and Flame Sensing Electrode?
I'm sorry we don't allow diy gas information on this forum therefore I will be closing this thread and have to advise you to engage a recommended gas safe engineer.
Mod
Last edited by a moderator:
