H
hav it
Hi i went to a boiler today in work, a baxi genasis combi.
Hot water seems to work but no heating. Fan pump ect all work ok .
Burner lights for a 30 second ish then all the green temp lights light up and it shuts down due to over heat. flow and returns cold but warm to boiler to bulk isolation valves.
i have taken the ch flow sensor out and inspected and it seems very worn.
Any ideas off you baxi chaps who see them every day would be a good help.
thanks
Hot water seems to work but no heating. Fan pump ect all work ok .
Burner lights for a 30 second ish then all the green temp lights light up and it shuts down due to over heat. flow and returns cold but warm to boiler to bulk isolation valves.
i have taken the ch flow sensor out and inspected and it seems very worn.
Any ideas off you baxi chaps who see them every day would be a good help.
thanks