Baxi WM/70/4PF issues

[jeeeensy]

Hi... I have a Baxi WM/70/4PF but have a problem with the pressure switch,
The switch keeps filling up with water,, I'm not sure how or why its doing this,, I have the switch loose so every once and a while I disconnect the tubes and let the water out. not ideal but it works.

I have sealed the two metal pipes where they drop out on the rear chamber/void that the flexi pipes fit onto, the pipes are also new, I have a new switch here and will fit once I find a solution to stop the water issue, is this moisture buildup in the chamber and gets into the pipes and then finds its way into the switch ( lowest point on the vacuum pipes ) any help is greatly appreciated.


Regards
Nick

 

[Hot&Cold]

There is a possibility of condensation in the metal tubes,its something your boiler service agent can repair,its not diy.

 

[jeeeensy]

Hi thank you,, the gas seems to be burning yellowish,, this may be a factor, not burning at the correct setting and I guessing condensation build up and hence my issue, boiler booked for service on Saturday, will update the thread once done,,