Biasi Boiler

Joined
6 Mar 2013
Messages
3
Reaction score
0
Location
West Midlands
Country
United Kingdom
Hi all

this is my first post and im hoping someone out there might be able to help me.
About 6 months ago my biasi boiler would lock out red light in the middlw of 2 green after just half a bath of hot water if i continued to run it after it had locked it would kick in hot again after a bucket full of cold this cycle would continue as id only get about like for like hot to cold.
in this time ive never had a problem with the central heating until this evening now when i turn the heating on i get 2 green lights flashing then a the red in the middle is constant with the two green flashing together
i dont no the model ive had it about 4 years from new.
sorry my tech explanation is poor and if anyone can point me in the right direction with the information provided i would be greatfull
 
Looks like you've got a possible ignition problem, or the boiler pre-ignition check sequence has flagged a fault. And therefore it's time you were pointed in the direction of a Gas Safe registered engineer.....I suggest you put the cover back on and call one in. :wink:
 
Just seems strange that I had it playing up with hot water after a period and now the heating!
If it was ignition it wouldn't of worked for the water for that period of time would it??
 
There are several PRE- ignition checks the boiler carries out before it tries to ignite....
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top