Hope someone can help, whatever program I put the wm on it goes pauses a little, then jumps straight to Rinse.
The drum turns, it quite happily fills with water and pumps it all out again. It just doesn't want to actually wash anything.
I've had the top off and laid it on its side. I've checked what connections I can are secure. I've also gently prised the back of the pressure switch and all seems sealed,the microswitch is good (tested the pin out with a multimeter).
I'm hoping its some a 99p sensor somewhere. The wife's hoping it's a new washing machine.
If anyone can point me in the right direction it would be much appreciated.
Edit: It also won't let me put Wash+ or Pre-wash on, regardless of the program.
Yours,
Steven.
The drum turns, it quite happily fills with water and pumps it all out again. It just doesn't want to actually wash anything.
I've had the top off and laid it on its side. I've checked what connections I can are secure. I've also gently prised the back of the pressure switch and all seems sealed,the microswitch is good (tested the pin out with a multimeter).
I'm hoping its some a 99p sensor somewhere. The wife's hoping it's a new washing machine.
If anyone can point me in the right direction it would be much appreciated.
Edit: It also won't let me put Wash+ or Pre-wash on, regardless of the program.
Yours,
Steven.
