Hi, Model is: SGS5362GB.
It was running a cycle then when I went back to it it was not on.
Fuse checked ok.
When I activate the drain microswitch, the pump turns etc , so there is power going to the machine ok.
Checked the door switch etc ok.
Tried the "re-set" procedure. No good.
Any idea what the other microswitch is for ?
Any ideas what could be wrong ?
It was running a cycle then when I went back to it it was not on.
Fuse checked ok.
When I activate the drain microswitch, the pump turns etc , so there is power going to the machine ok.
Checked the door switch etc ok.
Tried the "re-set" procedure. No good.
Any idea what the other microswitch is for ?
Any ideas what could be wrong ?