Ceiling problem.

Joined
24 Jun 2006
Messages
23
Reaction score
0
Country
United Kingdom
Hi again everyone.

I have started emulsioning my Grans ceiling with white emulsion but it doesn't look....right. Her ceiling was recently re-plastered and fixed due to a leak in the bathroom and I have noticed that the emulsion has brownish lines inbetween the plaster boards. I dont know how to get rid of this apart from opting for a darker ceiling colour. What should I do or what colour should I opt for? The kitchen tiles are completely white and so are the cupboards so I need something that wont clash.

Thank you again.
 
Sponsored Links
How many coats have you given it and what paint are you using? If you're using silk emulsion then it might take several coats because it doesn't cover as well as matt emulsion.
 
I reckon the ''brownish lines' are due to the water seeping through the weak spots in the boards 'ie the joints..give a couple of coats of oil based undercoat...using a roller, thet should do the trick nicely
 
Hi again. :D

I'm using Matt Emulsion at the moment. I think it might need about 2/3 coats because the paint looks almost see through.

I think the brown lines could be from where the water was leaking but the ceiling was replastered and a new plasterboard was fitted about 4 weeks ago. I thought it was the plaster board joint showing through and I've looked underneath the bath to see if there is a leak but its completely dry.
 
Sponsored Links
Then they could be overlaps where the plasterer has polished the surface up to much causing the paint not absorb into the surface like the rest of it.

Or do they form the exact shape of the joints in the board?
 
I've just had a look at the ceiling. On the left side there is a brown line which looks kinda patchy in areas about 6/7 inches along and there is another line on the opposite side of the light fixture running the same length. There is also several brown circle areas which does look like water leaking patches.

God knows where the leak is coming from through. :eek:
 
pop into b and q and get a damp testing meter for about a tenner that should confirm it
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top