Central Heating Controller/Valve

Fredy · 22 Jan 2003

Hi... When I set the Central Heating Controller to automatically switch the heating on or do manual overide, the Hotwater Controller shows the heating system to be ON, the pump either starts for a short period (say 10 mins) and then stop or the pump does not start at all. The Central Heating Controller shows it on all the time.

The Hot water works fine. Any ideas.
Thanks in advance

breezer · 22 Jan 2003

I am not a plumber or heating engineer, but if your pump has trouble stsrting or runs for a short periopd of time and you have changed nothing i would say the pump is on its way out
you can get one from

http://www.screwfix.com/app/sfd/cat/pro.jsp?ts=60394&id=11113

Fredy · 23 Jan 2003

Thanks Breezer
...I will give it a whirl...Fredy

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Central Heating Controller/Valve

Fredy

breezer

Fredy

DIYnot Local

Similar threads