- Joined
- 20 Apr 2014
- Messages
- 2,467
- Reaction score
- 0
- Country
How do i fit a new central heating pump
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Central heating pump
- Thread starter AnonymousImport
- Start date
- Joined
- 20 Apr 2014
- Messages
- 2,467
- Reaction score
- 0
- Country
Switch off the power to the central heating system. Disconnect the wire to the pump. Close the valves on each side of the pump. Put some rags or other absorbent material below the pump. Unscrew the union flanges that connect the pump to the valves. Lift out the old pump, a small amount of water will come out of the pump. Replace the sealing rings, and fit new pump by doing all above in reverse.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local