Rayburn Hot water and Central Heating Problem HELP PLEASE

Hobbis · 29 Jan 2003

I have just brought a house (converted village store) with a old Rayburn solid fuel Hot water and Central heating system.

I have a problem that I have the heating working fine but it doesnt heat the Hot Water Cylinder, I may add this is in the loft.

If i turn the central heating pump off it heats the Inlet pipe and to the Water Cylinder, and there return is warm so the exchange of heat is working fine.

But as soon as i turn on the pump the hot water feed to the water cylinder looses it heat.

QUESTION: is the pump in the wrong place. I have balanced the radiators that are on the system and they are working just fine.

Any question please that you need to know just ask away ........ hope you can help.

Regards

Hobbis

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Rayburn Hot water and Central Heating Problem HELP PLEASE

Hobbis

DIYnot Local

Similar threads