Conservatory Door Restrictor - Non-Euro Profile

[It's me]

We have double UVPC conservatory doors that open outwards. They do not have restrictors and swing in the wind. I have tried to find some friction restrictors for them, but as they are an older design (about 22 years old) and not Euro profile, I am struggling to find any that will fit.

Can anyone suggest some, other than simply using hooks to hold them open at 90 degrees to the wall?

Thank you.

 

[jj4091]

" I am struggling to find any that will fit."
Is that because you don't have a channel to fit them into. Is so have you thought about adapting a shoot bolt.

 

[crank39]

You mean a euro groove?

 

[crank39]

I've fitted the slimline ones like these to aluminium doors before that didn't have a euro groove

https://www.screwfix.com/p/mila-door-restrictor-satin-stainless-steel-100mm/5325P?gclsrc=aw.ds&gad_source=1&gad_campaignid=19815174711&gclid=Cj0KCQjwlYHBBhD9ARIsALRu09r7Y1Y9TukJx5cU25r7EpnZYIAwS89907maXTUt4tvY6s-no_A1eRIaAmVFEALw_wcB

 

[It's me]

" I am struggling to find any that will fit."
Is that because you don't have a channel to fit them into. Is so have you thought about adapting a shoot bolt.

There is a channel, but it is very shallow and not, as far as I know, Euro channel. We did have restraining hooks holding them to the wall, but it would be nice to hold them partially open.

 

[It's me]

You mean a euro groove?

Yes, Euro groove.

 

[It's me]

I've fitted the slimline ones like these to aluminium doors before that didn't have a euro groove

https://www.screwfix.com/p/mila-door-restrictor-satin-stainless-steel-100mm/5325P?gclsrc=aw.ds&gad_source=1&gad_campaignid=19815174711&gclid=Cj0KCQjwlYHBBhD9ARIsALRu09r7Y1Y9TukJx5cU25r7EpnZYIAwS89907maXTUt4tvY6s-no_A1eRIaAmVFEALw_wcB

Thank you. I shall have a look at these.