Damaged vanity unit

Joined
25 Aug 2016
Messages
1,312
Reaction score
334
Country
United Kingdom
Hi all,

Not sure if this belongs in here but I'd guess at least one plumber on here has managed to damage bathroom furniture before.

IMG_20230406_135739.jpg


As you can see in the image I've managed to catch the front of our undersink vanity unit and the paint has flaked off in two places.

Anyone any suggestions on the best way to repair this that isn't fully replacing the vanity unit

Thanks
Chris
 
Is it fully installed and bonded to the basin ? Could you remove it ,disassemble the cabinet and turn the top rail around ( damaged part) so the inside becomes the outside ?
 
Unfortunately not as the ends are rounded i have swapped the top and middle rail and turned it upside down so at least the chip sits inside the handle recess, if I touch it up with a similar grey it should be less obvious if I can't find anyone to do a smart repair.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top