Drayton digistat +2

[Mike8591]

Hi guys, I want to change over my old digistat 2 to the new digistat +2. I have 2 wires red which is live and black. On the new connection block there are 3 connection points marked from top to bottom....

C
load/on
off

Not sure where to wire to, I presume red/live goes to load, but where does the other go to C or Off

Hope you can help, many thanks

Mike

 

[Lectrician]

Red is permenent live, and goes to C (common)

Black is the switched live ('fire'), and goes to the LOAD/ON terminal.

The other termnal is not used.

 

[Mike8591]

Many thanks for that info, it works a treat.

Mike