About 2 months ago I had a new ball cock and valve fitted in the water tank (because the overflow was dripping). The same thing is happening again when the boiler is fired up. Any suggestions?
Dripping tank overflow
- Thread starter news
- Start date
Sponsored Links
When the boiler fires up the water in the system will expand up into the header tank by approx 2-3".
New ball valve has probably been set too high and needs adjusting so tank level cold is lower.
One wonders if you needed new ball valve in the first place
New ball valve has probably been set too high and needs adjusting so tank level cold is lower.
One wonders if you needed new ball valve in the first place
Thanks Dave will give it a try.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
