Fitting hot/cold water tails to stop valves.

[camerart]

Hi,

I'm fitting a Kitchen sink mixer tap, with 2X flexi tails. I have 2X ball stop valves on the copper inlets. Each Valve has an olive, but the flexi pipe has a rubber flat seal.

Are they supposed to fit together or does something go in between, if so is it necessary?

Cheers, Camerart.

 

[seco services]

Just take the nut/olive off the iso and screw the flexi straight on to the iso.
Don't over tighten them or you'll damage the rubber seal.

 

[camerart]

Easy!

Thanks for the reply.

Cheers, Camerart.