- Joined
- 21 Feb 2015
- Messages
- 5
- Reaction score
- 0
- Country
Dear all,
Please advice and help as i have below problems.
i am using Galaxy 48 panel.
1) There are 2 panic buttons connected to 2 of the inputs of 1031 and 1032 of expander.
Please advice what should be selected in programming zones and resistor select.(panic button side, normally closed and common is connected.
2) A landline connection is directly connected from the PSTN (without BT socket ) directly to the B and A of the panel. The client wants dial tone to a outside number only when there is alarm .
Please advice steps to configure the dialer.
Error says COMM FAIL COM1 and please advice what is the Account number as mentioned in the config
Please advice and help as i have below problems.
i am using Galaxy 48 panel.
1) There are 2 panic buttons connected to 2 of the inputs of 1031 and 1032 of expander.
Please advice what should be selected in programming zones and resistor select.(panic button side, normally closed and common is connected.
2) A landline connection is directly connected from the PSTN (without BT socket ) directly to the B and A of the panel. The client wants dial tone to a outside number only when there is alarm .
Please advice steps to configure the dialer.
Error says COMM FAIL COM1 and please advice what is the Account number as mentioned in the config