Halstead Boiler Lockout

Joined
11 Feb 2008
Messages
52
Reaction score
0
Location
Cheshire
Country
United Kingdom
Not a major problem, just an irritant really. When the boiler has not been used for a while when there is a demand for CH or DHW the boiler will go to fire up and start whirring away but you can hear that the gas doesnt get lit within the combustion chamber, sometimes after 1 reset it works fine but then it could be 4 or 5 resets.

Any suggestions?

Halstad Ace combi boiler - recently changed Diaphragm in divertor valve and auto air vent (each one was knacked and required changing) also had a service in which the venturi was cleaned.

Could the sparker have gone within the combustion chamber? The guy who serviced it said it looked ok and cleaned it.
 
Sponsored Links
A common problenm with Halstead combi's. If its not been used for a while the gas valve has a habit of sticking.

Are you sure the venturi was properly cleaned out???
 
He removed the fan and the venturi and showed me it was clear.

If it is the gas valve sticking will it get progressively worse? Boiler is 6 years old.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top