Heating Advice
- Thread starter baluachrach
- Start date
Sponsored Links
- Joined
- 12 Nov 2007
- Messages
- 32
- Reaction score
- 0
- Country
Thanks for the reply's. The existing boiler was a boulter bonus. The vent is on the HW side. does that mean when the CH is on there is no expansion? There is 1 heater without a trv so will this act as a bypass
Wasn't sure about converting to a sealed system as the CH rads are on 10mm that seems pretty old and have been advised against it as then may have leeks. Had two quotes for around £3500 to supply a 15-21 Grant external and alter the pipework but seems a bit steep or would that seem to be in the ball park?
Wasn't sure about converting to a sealed system as the CH rads are on 10mm that seems pretty old and have been advised against it as then may have leeks. Had two quotes for around £3500 to supply a 15-21 Grant external and alter the pipework but seems a bit steep or would that seem to be in the ball park?
- Joined
- 12 Nov 2007
- Messages
- 32
- Reaction score
- 0
- Country
Hi another wee query! Would this system be suitable for a combined feed and expansion?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
