Installed above alarm several weeks ago, the one only problem I have not been able to resolve is that there is no option to part set the system using program 2. Program 1 is the main program so I've set up program 2 so the landing pir is not used and intended to use this program at night.
The instructions say enter CODE press P and select program number in this case 2 so I press number 2 but nothing happens it stays set on program 1.
I also have an LCD keypad upstairs for use at night.
One thing the instructions say is that "the installer has to program the system for part operation", I presume this mean program 2 has to be set up which I've done or am I missing something.
The instructions say enter CODE press P and select program number in this case 2 so I press number 2 but nothing happens it stays set on program 1.
I also have an LCD keypad upstairs for use at night.
One thing the instructions say is that "the installer has to program the system for part operation", I presume this mean program 2 has to be set up which I've done or am I missing something.
program 2 exit mode was disabled changed it to timed 