Hi. I would like to update my current Honeywell ST699B programmer with one that gives independent control of the hot water from the C/H. Can anyone advise if the Honeywell 2 channel ST9400A is a suitable and straight forward replacement? Thanks
Honeywell ST699B programmer replacement
- Thread starter Popilloby
- Start date
The ST9400A would indeed be a suitable replacement - changeover should be straightforward as long as you can follow Honeywell's detailed and clear instructions for wiring the new backplate that will be required.
An even better choice to my way of thinking would be the ST9400C, which allows 7-day programming (you can set DHW and CH on/off times independently for each day of the week; to suit your lifestyle).
Good luck!
An even better choice to my way of thinking would be the ST9400C, which allows 7-day programming (you can set DHW and CH on/off times independently for each day of the week; to suit your lifestyle).
Good luck!
- Joined
- 5 Nov 2024
- Messages
- 3,820
- Reaction score
- 1,935
- Country
Hijacked a nigh on 10 year old thread. Anyhow, I presume you mean ST400? If yes, the wiring should be straightforward.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
