Hot water making heating start!

Joined
9 Feb 2026
Messages
3
Reaction score
0
Country
United Kingdom
Hi Guys

I had my boiler shut down ,2.5 internal fuse blew!

I replaced the fuse got the boiler back on but no hot water and when i run the hot water tap it starts the central heating off!

Boiler in question is a worchester greenstar 34cdi

any help apreciated please.

Thanks

Jon
 
Could be diverter valve but as a fuse has blown it could be the PCB. Will need to be tested following the manufacturer's fault finding process.
 
Gotta love a Chinese Worcester knock off :ROFLMAO: . Could be the diverter valve/motor. Fuse could be the pump, electronics et al.
 
I had my boiler shut down ,2.5 internal fuse blew!

I replaced the fuse got the boiler back on but no hot water and when i run the hot water tap it starts the central heating off!

See this OP's other posts, it seems he has been doing lots of faffing about with the systems electrics, which might explain the blown fuse. He also seems to be opening up a room sealed boiler. I wonder if he is gas qualified?
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top