Hotpoint dishwasher fdw85 al08 error

[cklein]

Hello, please can anyone heilp me solve a fault with my dishwasher not heating up the water and producing al08 error. I have already replaced the heating element and measured 25 ohms across it to verify if its good.
Your help is appreciated. Thankyou.

 

[rocks1]

Pcb faulty , that's why you should test things before fitting. Pcb is around 50 .00.

 

[cklein]

Thankyou rocks1, which pcb should i replace? cheers..

 

[rocks1]

Right to be honest when you change the Pcb it needs to written by a card reader. There are 2 types depending on serial no , one is 50 and other one 60 quid. You have two options scrap it or call hotpoint all in parts and labour 100.00. That's the best way cos if you buy the Pcb you won't be able to programme it.