HOTPOINT WF541P

[VICDANLOUBOO]

does anyone know why RINSE HOLD and MINI LOAD flashes very quickly after you turn washing machine on. the only way to stop them is turn the appliance of from the plug. water is filling up, not going into drum just emptying straight out. checked filter, collected about six pounds from it.???

 

[rocks1]

Wot number lights are they from the left 1 and 3 2 and 4 etc

 

[VICDANLOUBOO]

lights 3 and 4

 

[rocks1]

you have a ntc problem ,check the 2 thin blue wires on the heater found at the back, also check connections are tight on pcb ,if that fails a new pcb is req .

 

[VICDANLOUBOO]

ok thank you will check blue wires, forgive our ignorance but what is pcb?

 

[rocks1]

Printed curcuit board found at the back in the corner covered in a White plastic cover.remove rear White cover .

 

[VICDANLOUBOO]

thank you for advice