How do i take of the metal rings at the top of the pipes?
- Thread starter SMYTHERS
- Start date
Sponsored Links
fido said:I think we need a bit more informationWhat sort of appliance is this?
Sorry it's a Creda 1000....
Theres a rattling noise coming form the machine when it's draining, i think it may be one of my hair pins stick in the pump???
Sponsored Links
I think I know what you mean now. The spring loaded hose clips that secure the ends of the internal hoses in the washing machine? If I were doing the job I would not disconnect these but would unscrew the pump from the base of the machine, place a container under it to catch the water, then unscrew the motor section from the pump cover. These might be torx screws but you can often tackle them with a small flat blade screwdriver. If the machine is still full of water you will first need to drain it by placing the outlet hose into a bucket at floor level.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
