HOW TO CONNECT SD1 TO DF60004 PANEL

[REDA AWAD]

I'm trying to connect up a sd1+ to DF60004 PANEL and could do with some help as the instructions don't mention my model .I need help

 

[sparkymarka]

Is that a fire alarm panel ?

 

[REDA AWAD]

Intelligent Addressable Control Panels - DF6000 Range cooper

 

[sparkymarka]

For a start it will need a 12v power supply inc battery back up as the fire panel will be 24v , connect across the relay on the fire panel ( voltage free contacts ) as per diagram on page 7 in the SD1 booklet

 

[REDA AWAD]

thank you for your response but i try to connect as per diagram and not work

 

[sparkymarka]

As in one wire from the 12+ , to the relay in the fire panel (common) out of normally open to trig A or B or C ? ....... Jumper set at positive

 

[REDA AWAD]

I Connect wire from the 0v to the relay in the fire panel (common) out of normally open to trig A and Jumper set at Negative and it work

thanks sparkymarka for your support