ideal isar 24he, making a over gas sound.

[bootnecksport]

Hello can anyone help, been to a job, isar24He, I have cleaned and made sure that I have the correct gap on the electrodes, I have had the flue gas analyser on set up to 8.49co2 30ppm & 0.0003/0.0004. (full rate)

The problem is that when I leave the propety i am getting called about a hour later.
It all set up and tested. DHW on it fires up and works ok /Heating fires up and working ok, both on together they works ok. But I leave the property they are calling me saying its making a noise, I have heard it myself and I sound like it over gassed, I have been back 2 time,also been on the phone to ideal about it, but did not give me any more clues, I have also made sure the cond-trap is not blocked, can you please give me any idea’s to sort it.
sorry forgot to say DHW is not the best,

 

[Dan Robinson]

Post this in the Combustion Chamber if you want answers.

 

[gas_man_gaz]

if it sounds like a fog horn check the trap/condensate isn't blocked, the sediment from the heat exchanger drys rock hard so ya might need to replace the trap

 

[bootnecksport]

thanks, but i have checked that and its ok,

 

[bootnecksport]

Post this in the Combustion Chamber if you want answers.

Dan have you got the answer???

 

[Dan Robinson]

If you're an RGI register for the CC and find out

 

[ianmcd]

sorry mate Im with Dan on this one we both know what it is but the site rules forbid us from telling you on the open forum you will have to register in the CC for either of us to tell you

 

[bootnecksport]

dan! it on cc mate,....

 

[bootnecksport]

If you're an RGI register for the CC and find out

DAN i am on cc and i put in there just after you said mate...

 

[Dan Robinson]

And you will see I posted a reply in there after the post in this thread

Don't know if you've replied yet.