Hope someone can help i've an indesit is70c condenser dryer and need to take the drum out to change the drum shaft on the back as its bust.Would anybody know how to take the thing apart is it a case of taking off the front and the drum lifting out and if so how thanks in advance for any help
indesit condenser dryer
- Thread starter elphias
- Start date
Sponsored Links
- Joined
- 30 Apr 2008
- Messages
- 6,137
- Reaction score
- 1,044
- Country
No need to remove the drum just remove both side panels and unscrew rear panel but don't remove it just leave a gap from the top of 4 inches then unscrew from inside drum and refit new one on the rear and tighten up from inside drum. You might need someone to hold it on the drum rear while you screw it up.
will have a try at the weekendDIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
