Indesit WD143 10 Flashes Error Code

28 Oct 2006
Reaction score
United Kingdom
Hi, Looks like common fault but cant find solution. Indesit WD143 errored out early on in cycle making constant pump draining noises. Cleared 5p from pump which may have been the issue. Checked all other hoses/pump impellor and all OK, cant see any blockages. Machine now drained but can't reset it - tried moving dial to the dot and switching off when neon flashed quickly, then selected new program but no avail. The error code is 10 flashes. Any idea what this one means? When it restarts theres small knocking sound from top somewhere, and then the clicking round starts again.
Sponsored Links
10 flashes indicates a fault in the pressure switch area. Check for loose conections on the pressure switch and module. Check for operation of the switch by removing the clear tube on the switch and blowing gently into the switch, you will hear it click once. When the pressure is released it will click again. Also try blowing into the tube, you should be able to blow quite easily.
This fault can also mean a faulty module if your very unlucky. Hope this helps.

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Sponsored Links