Not sure what it's telling me if anything at all.But on initial power up at socket,all of the led's are flashing very fast.Not sure if this is an error message....Anyone help please..John.
Indesit wil125s.All led's flashing...Ahrrr..
- Thread starter jn22sky
- Start date
I've checked the plugs & connectors on to the boards & all looks ok...The led's i have got flashing are the green leds + red lock at top horizontally.And the spin/9h green led....at the lower vertical stack..The wif just informs me that it does this when she goes to use it,but it always clears itself.......Not now it don't.
Thanks for the above info....On powering up washer this morning,I have led's 1& 4 flashing(timer delay & extra rince).........Is this an eprom error ?
Latest......I've checked the pressure switch.Clicking in & out ok...Have switched on again & now have all the led's flickering again..If I need a new processor & shall bin the ficker...
- Joined
- 30 Apr 2008
- Messages
- 6,137
- Reaction score
- 1,045
- Country
yep pcb shot ,you can get a recon one from http://www.emwelec.co.uk/index.php?action=category&id=2
Thanks...I've checked the w.site....Shall have to remove pcb & check identity.Almost certain of the board I need...Are these pcb's unreliable ?.My washer is only just out of warranty.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
