- Joined
- 20 Apr 2014
- Messages
- 2,467
- Reaction score
- 0
- Country
i installed the heater system but i cant instal the thermostat how does it work, or how do i conect the thermostat to the heater
instaling the thermostat
- Thread starter AnonymousImport
- Start date
- Joined
- 20 Apr 2014
- Messages
- 2,467
- Reaction score
- 0
- Country
I believe it depends on what type of heating system you have.
Don't know about closed system (combi boiler) but the the open type system the stat is wired in series with the pump.
The live wire of the pump goes to the stat (instead of the pump) and the other side of the stat goes to goes to where the wire was that you removed from the pump.
I did a search and found this http://www.gasman.fsbusiness.co.uk/wiring.htm
Don't know about closed system (combi boiler) but the the open type system the stat is wired in series with the pump.
The live wire of the pump goes to the stat (instead of the pump) and the other side of the stat goes to goes to where the wire was that you removed from the pump.
I did a search and found this http://www.gasman.fsbusiness.co.uk/wiring.htm
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local