Boiler Baxi 105e
Timer Dratyon Lp111
Stat: Drayton RTS8 (requires 3 wire connection through baxi 105e)
Thought I'd got this sorted in my head then became confused when referring to the various wiring diagrams.
The wiring block on the boiler is joined to the mains on terminals 'L' and 'N' but it says that all control external units must be joined via terminals 1( 230 volts) and 2( I take this is neutral).
Understanding that the stat is basically in series with the timer I'm assuming that where the Drayton instuctions say L then this would be joined via the timer to terminal 1 (230v) at the boiler and N (load) would go to 2 on the boiler.
The other 'N' I take it goes to the mains Neutral.
I'm joining all this through a junction box.
Thanks in advance for any advice..........Yours .......Mac
Timer Dratyon Lp111
Stat: Drayton RTS8 (requires 3 wire connection through baxi 105e)
Thought I'd got this sorted in my head then became confused when referring to the various wiring diagrams.
The wiring block on the boiler is joined to the mains on terminals 'L' and 'N' but it says that all control external units must be joined via terminals 1( 230 volts) and 2( I take this is neutral).
Understanding that the stat is basically in series with the timer I'm assuming that where the Drayton instuctions say L then this would be joined via the timer to terminal 1 (230v) at the boiler and N (load) would go to 2 on the boiler.
The other 'N' I take it goes to the mains Neutral.
I'm joining all this through a junction box.
Thanks in advance for any advice..........Yours .......Mac