Ivanhoe IA50 cold water tank lid

[just pumps]

Hi, neighbour has the above circular cold water tank which needs a replacement lid, I`ve measured it at 850 dia, are all the lids for this size of tank this size?

 

[Hot&Cold]

Never heard of an ivanhoe cold water tank,its probably a rebadged product.

Dont think you will find a snug snap on lid as necessary for bylaws reasons but a company called 'davant' supply 33.5 inch diameter lids. Could be better than no lid at all .
Have fitted a few and with a new lagging kit it's all held in position.Consider the cost

 

[just pumps]

Never heard of an ivanhoe cold water tank,its probably a rebadged product.

Dont think you will find a snug snap on lid as necessary for bylaws reasons but a company called 'davant' supply 33.5 inch diameter lids. Could be better than no lid at all .
Have fitted a few and with a new lagging kit it's all held in position.Consider the cost

Thanks, the details are molded in the lid and that is all I can find.

 

[JohnD]

33.5" is surprisingly close to 850mm.

 

[just pumps]

33.5" is surprisingly close to 850mm.

It is indeed, only problem with the darvant site is I`m not see lids on their own.

 

[JohnD]

maybe something will turn up...

https://www.ebay.co.uk/itm/50-Gallo...814844?hash=item41e3635fbc:g:mv8AAOSwrQxbDqPz

https://www.ebay.co.uk/itm/Titan-Lid-50-Gallon-Round-/182480123538?_trksid=p2349526.m4383.l4275.c10

https://www.ebay.co.uk/itm/CL25-Circular-Cold-water-tank-lid/183249794558?_trkparms=aid=222007&algo=SIM.MBE&ao=2&asc=49129&meid=f8d72a0bc72d44819248efacc5f81da9&pid=100005&rk=2&rkt=2&sd=282987814844&itm=183249794558&_trksid=p2047675.c100005.m1851

good luck!

my tank is rectangular and has "spread" a bit with the weight of water pushing the sides out, I cut nicks in the corners of the lid and it now snaps on.

 

[Nige F]

Thanks, the details are molded in the lid and that is all I can find.

I remember Ivanhoe from the 1970's - you won't get a bylaw snap on lid, the ones supplied were just laid on