- Joined
- 13 Nov 2017
- Messages
- 5
- Reaction score
- 0
- Country
Hi, hoping someone can help. I removed the the main wash pump from dishwasher taking photos as i went of the wiring. When i came to put back in none of the photos have been saved to my phone (nightmare). I have a plastic fitting from the pump with 1 blue wire and 1 black wire. From the machines wiring loom have 4 connectors 1 female spade has a pink wire and orange wire. 1 female spade has 1 pink cable.
The other 2 cables are as follows. 1 female spade has a pink wire and a white wire on it and finally 1 female spade has a white wire. My question is does anyone have a schematic or does anyone know where i should connect the wires. There is the connector on the pump with 2 connectors (blue and black) and then a valve on the pump with 2 connectors. any help would be appreciated.
The other 2 cables are as follows. 1 female spade has a pink wire and a white wire on it and finally 1 female spade has a white wire. My question is does anyone have a schematic or does anyone know where i should connect the wires. There is the connector on the pump with 2 connectors (blue and black) and then a valve on the pump with 2 connectors. any help would be appreciated.