Hi, in my kitchen i have a laminate floor. my o/h wants me to partition off one end of this kitchen with a stud wall to make a utility room but does not want the laminate floor in what will be the new section. my question is what is the best or recommended way to cut the laminate in situ? i.e. while it is still down. need some ideas chaps.
laminate floor
- Thread starter honda
- Start date
Sponsored Links
Best with a circular saw and set the blade depth to the same thickness as the laminate so no damage is caused below it
Use a laminate cutter to score the surface then hand cut the rest
Sponsored Links
Handsaw.
Gently cut with the end of the saw, applying pressure if needed to the top of the blade.
Use a new sharp saw.
Or use one of these http://www.bosch-do-it.co.uk/boptoc...=en&division=hw&ccat_id=95226&object_id=14153
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
