leak on tank pipe

[den123]

can anyone help please i have just replaced the 3 way diverta valve in the airing cubard in doing so have now got a slight leak on the top pipe middle of tank can i undo fitting and reseal it to stop the slight leak have taken pics

 

[den123]

i have loaded pics on but cant see them there are 3

 

[den123]

//www.diynot.com/network/den123/albums/

 

[den123]

//www.diynot.com/network/den123/albums/

 

[Madrab]

I am sorry, but the pics are not really clear enough, if that's the feed to the cylinder coil then the system needs to be drained down to that point.

I assume you haven't been able to nip it up?

 

[den123]

hi rob i have tighned it up a bit but frightend to go to much incase it knackers it altogether

 

[den123]

can it be sealed with boss white thanks

 

[Madrab]

It depends on the type of end it is, if it's compression then a tweak should seal it, if it's not then the thread probably needs sealed again, PTFE/Loctite along with BossW or another thread compound.