Hi there - I am totally confused - I accidently left the hot tap on tonight for about 2 hours - and ran all the hot water out! (I know, I know) However, no one has used any of the taps since 8 pm (its now 12.45am) and there is still no hot water? The thing that is worrying me the most is that now the immersion heater light has gone off and wont come back on again. I have checked all the fuses - they're fine... Has anyone got any ideas? Thanks!
Left hot tap on - No hot water and Immersion light now off!
- Thread starter tidybrown
- Start date
Air lock,
You have emptied the immersion probably quicker than the tank in the loft could refil it.
Go into the loft find your main tank...which hopefully has refilled by now
There should be two outlets from it..one to your cold water bathroom taps one for the HW cylinder.
Get a hose and put it over the outlets and try blowing(fill hose with water first by sucking!!) down to rid of the airlock..works every time for me.
Marty.
You have emptied the immersion probably quicker than the tank in the loft could refil it.
Go into the loft find your main tank...which hopefully has refilled by now
There should be two outlets from it..one to your cold water bathroom taps one for the HW cylinder.
Get a hose and put it over the outlets and try blowing(fill hose with water first by sucking!!) down to rid of the airlock..works every time for me.
Marty.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
