Hi
I have a mains pressure shower mixer which is only providing luke warm water, at any setting.
The boiler is fine and provides roasting water to the other hw taps in the house, with plenty pressure.
Water to the bath hw tap, part of this shower, which is from the same feed as the hw to the shower mixer is roasting, and there is plenty of pressure.
The mixer until recently provided a roasting power shower.
Now it provides only a cold shower or a lukewarm shower; even at the hottest setting. The delivered pressure seems slightly lower then when it worked properly.
At times - not always - when it did work properly, the heat setting would slide back round to cold, of it's own accord.
Anyone any ideas.
Here is a picture of an identical spare that I have. I can't seem to get it further apart than shown.
Thanks
I have a mains pressure shower mixer which is only providing luke warm water, at any setting.
The boiler is fine and provides roasting water to the other hw taps in the house, with plenty pressure.
Water to the bath hw tap, part of this shower, which is from the same feed as the hw to the shower mixer is roasting, and there is plenty of pressure.
The mixer until recently provided a roasting power shower.
Now it provides only a cold shower or a lukewarm shower; even at the hottest setting. The delivered pressure seems slightly lower then when it worked properly.
At times - not always - when it did work properly, the heat setting would slide back round to cold, of it's own accord.
Anyone any ideas.
Here is a picture of an identical spare that I have. I can't seem to get it further apart than shown.
Thanks
Last edited:
