Hi there,
I want to make use of the alcoves either side of our chimney breast mounted TV. I've searched and searched but can't find any manufactured ones that will fit nicely - the alcoves are 1.4m and 1.75m wide and I want the shelves to span the entire alcove.
I also want to have the shelf deeper both wall sides and curve them in so that they fit flush to the chimney breast at this side. I would like to use MDF as i will get a better finish but think due to the length of the shelves and their use (HI FI seperates/speakers/books) that MDF will bowe.
What material do you suggest to take this weight and to get a nice painted finish, I am thinking either high gloss or Eggshell, imperfection free!?
Lastly - how do you suggest I cut the curve in the shelf, should I make a template of the curve and router them and how do I go about getting even results each time as there will be 4 shelves in each alcove.
Many thanks,
Mike.
I want to make use of the alcoves either side of our chimney breast mounted TV. I've searched and searched but can't find any manufactured ones that will fit nicely - the alcoves are 1.4m and 1.75m wide and I want the shelves to span the entire alcove.
I also want to have the shelf deeper both wall sides and curve them in so that they fit flush to the chimney breast at this side. I would like to use MDF as i will get a better finish but think due to the length of the shelves and their use (HI FI seperates/speakers/books) that MDF will bowe.
What material do you suggest to take this weight and to get a nice painted finish, I am thinking either high gloss or Eggshell, imperfection free!?
Lastly - how do you suggest I cut the curve in the shelf, should I make a template of the curve and router them and how do I go about getting even results each time as there will be 4 shelves in each alcove.
Many thanks,
Mike.